Lenovo LP40 Thinkplus Waterproof Earbuds User Manual.
Packing List.
reminder.
except for the operation methods specifically marked in the manual,please
do not try to disassemble or replace any parts in the earbuds.
don’t put the earbuds in the water or any liquid.the earbuds are not waterproof.
if any liquid enters the product by accidentally, please disconnect and
remove the connection immediately.
please make sure that there is no water on your hands when installing or uninstalling
the product to avoid electric shock.
do not put the product near by the heat source or expose it
to the fire source directly.
do not put the product in the environment with strong electromagnetic force,
otherwise it will cause product malfunction.
Earphone specification.
Transmission distance: ,–10M Battery capacity: 30mAh Length of use: about 5
hours (headphones) Charging time: about 1.5 hours (headphones) Rated input: 5v 30mA.
Battery capacity: 250mAh Charging time: about 1.5 hours Rated input:
5v 300mA (all technical information is subject to actual performance).
Charging the box.
The green light flashes when the battery is low (Warm tip: put the earphone in the
charging box, the green light of the charging box flashes, please charge the charging box
in time.) the led indicator statusEarphone Put the earphone in the charging box and
charge the earphone automatically pairing status: white light off: connected status:
lights out music/call status: lights out charging status: white light is always on
Charging compiteligbut low power status: white light flashes every 2 minutes Charging
case To charge the case use a type-c cable and 5v adapter.
Discharge Status of charging chamber: Green and bright When the charging
box is charging, the red light flashes After the charging box is fully
charged: The red light is always on.
product operation instructions.
turn on Method 1 : the earphone is taken out of the charging
box and turned on automatically.
turn off Method 1: put the earphone back into the charging box and turn it off
automatically; Mode 2: In the BOOT state, long press the function key 6 seconds off.
pairing Mode 1 : headset automatically interconnects when removed from the charging
box (tws interconnects successfully) ; main ear white light flashes (auxiliary ear
light goes out) mode two: boot automatically into pairing mode (unpaired) left/right
white light flashing if you want to connect to the earphones (support single ear use).
The operation of the touch button Music play Mode left/right earphone operation
Volume left/right earphone operation Call mode left/right earphone operation.
factory data reset.
if the left and right earphones are not connected to mobile phones and other related
bluetooth devices after being turned on, click the left and right earphones touch
button five times respectively, then shut down the left and right earphones and put
them back into the charging bin to regroup and enter the bluetooth connection state.
THE NAME AND CONTENT OF SUBSTANCES IN THE PRODUCT.
NamesHarmful SubstancesPbHgCdCr(VI)PBBPBDEPCBA
componentsOOOOOOStructural componentsOOOOOThis form is compiled
in accordance with SJ/T 11364.
0: Indicates that the content of the hazardous substance in all homogeneous
materials of the part is in below the limit required by GB/T 26572.
X: Indicates that the hazardous substance at least in a certain homogeneous
material of the part exceeds The limit requirements specified in GB/T 26572.
The parts marked with “X” on the form are all harmful due to the limitations
of global technological development.
Substitution ofPrinted circuit board components: Including printed circuit boards
and their parts, electronic components, etc.
and depending on the product model, the earbuds you purchased may not contain
all the above components.Electronic and electrical products sold in the
People’s Republic of China must mark this Logo, the number in the logo
represents the product under normal use Environmental protection use period.
WARRANTY STATEMENT.
Disclaimer This user manual does not have any form of guarantee,position
expression or other implication.
The mentioned products,specifications and information are for reference only,and the
content will also be updated on the web at any time without additional separate notice
Warranty statement: The product attached to this document is guaranteed as follows:lf the
product is twelve (12) months from the date of purchase(“Warranty Period”),under normal
conditions of use due to quality defects damaged,can be repaired.Free repair;free
replacement if the manufacturer confirms that it cannot be repaired; repaired or replaced
product.Continue to enjoy the warranty during the remaining warranty period (the shortest
not less than 30 days).
Purchased by sale the ticket date shall prevail;if the purchase date cannot
be determined,the warranty period shall be 13 (13) Monthly calculation.
If you apply for a warranty,please call the product service hotline first and execute it
in the manner instructed by us.When applying for warranty,you need to provide an
accurate,complete and clearly filled out valid sales invoice.The above guarantee does
not apply to the following situations: Exceeding the validity period of the three
packs; Altering the warranty card and product code does not match the product body; Causes
caused by misuse, abuse or improper transportation, use, maintenance or storage
obstacles or damage; Failure or damage caused by force majeure (such as earthquake, war,
disaster, etc.) or accident bad; The zipper and tower buckle are damaged due to excessive
force; Disconnection or tearing caused by excessive load; Any damage caused by sharp
objects; Products with signs of burning of flooding; Damage caused by unauthorized
disassembly; Aging, discoloration, abrasionsupture and other losses that occur
during the normal use of the product.
Warranty statement 1f the original identification label of the
product is changed or damaged, this guarantee will become invalid.
The completeness and appearance of the product and accompanying materials are
not within the scope of the guarantee.
You should check on the spot and objections to any discrepancies.
The above guarantees are all we make regarding the products.
and are only applicable In mainland China.
Nothing in this document affects consumer rights that cannot be excluded
or restricted under the law profit.
FAQS.
Can I use the earphones in the rain?
The earphones are not waterproof.
Please do not put them in the water.
How long can I use the earphones?
About 5 hours.
How long does it take to charge the earphone.
About 1.5 hours.
How long does it take to charge box and earphone at the same time.
About 2 hours.
What does the green mean in Lenovo LP40.
Charged: red light always on The green light is always on when charging
the earphone in the charging bin.
The green light flashes when the battery is low (Warm tip: put the
earphone in the charging box, the green light of the charging box flashes,
please charge the charging box in time.) Is Lenovo LP40 good for gaming.
When it comes to gaming, unfortunately, cheap wireless earphones usually cannot
deliver very low latency that would give you an advantage in competitive gaming,
that being said, the LP40 offers one of the lowest latencies in the market of
budget earphones of around 100ms, my take is it is acceptable at bestand it didn.
Do Lenovo earbuds work with Android?
Pull down the shade from the top of your device and long-press the Bluetooth symbol.
It will immediately take you to the Bluetooth menu, where you may switch
it on and then search for devices.
Select the headphones you want pair by tapping their name.
Is there an app for Lenovo earbuds?
Lenovo’s Smart Wearable app is and available on iOS and Android.
The app shows you an image of the buds, the level and your four equalizers presets.
Why is my Lenovo sound so low?
Check Sound Control Panel.
If the volume is lower than expected when using multiple communications applications,
check the settings in Sound Control Panel.
Select the Search icon type Sound settings.
Select Sound settings.
Reset the earbuds if you can only hear music/voice on one side after
pairing with your mobile device.
Why is my volume so low though it’s all the way up.
Go to Settings Sounds and Vibration Advanced Settings Sound Quality and Effects.
Set the Equalizer to Normal.
Go to Settings Sounds and Volume Media Volume Limiter.
If it’s on, set the Custom limit slider to maximum.
How do you get both earbuds work at the same time.
To sync them together turn your bluetuth and take them out of their case…
press the buttons on top of the twice quickly at the same time.
they should start to pulse/breathe blue and then start flashing(looking for a device)
select Jam Ultra in your Bluetooth settings…
hope this helped!
Can you charge earbuds case only?
The case can be charged without inserting the earbuds; when they are inserted, the
earbuds and case will charge simultaneously.
Why is my left earbud so quiet?
Dirty headphonescould be the reason why the is quieter on one side of the headphones.
If your headphones have mesh protection, dust can easily get inside and
is difficult to see or shift.
Dust can disrupt the flow of sound waves.
Before you throw them away, look to if you can clean inside the mesh.
Do headphones get quieter over time?
Aside from normal wear and tear, might lose volume over time.
This is due to the sound waves it generates.
The sound will then degrade, characteristics such as bass and loudness.